UNIKA PRO-MMD
UNiKA PRO-MMD is a professional passive DI box designed to drive electronic devices with unbalanced line outputs such as music players, media players, computers, tablets, and phones to professional balanced inputs with low impedance, such as to microphones. e.g. to mixers, external microphone preamps, active speakers and sound cards. Since PRO-MMD is a passive device, no batteries or other power supplies are required.
3 different input connectors: a STEREO mini TRS jack, individual L-R TRS jacks and separate L-R RCA phono jacks. These pairs of inputs cannot be mixed together, so only one source should be connected. All left connections are parallel wired, as are the right connections. This way, the two unused L-R pairs can be used as THRU connectors to route the original signal to a local monitor, headphone amplifier or instrument amplifier.
FEATURES
- CIRCUIT PRINCIPLE: Passive with transformer-balanced output
- INPUT CONNECTION: 1 TRS mini jack, 2 TRS jack, 2 RCA
- LINK: all inputs in parallel
- INPUT DAMPING: 0 / -20 dB switch
- OUTPUT CONNECTION: 2 XLRm female, balanced, isolation transformer
- INPUT IMPEDANCE: 1 kOhm / 0 dB, -20 dB
- OUTPUT IMPEDANCE: 50 ohms
- OUTPUT GROUNDLIFT: via switch
- MAXIMUM INPUT LEVEL BEFORE CONTROL: +22 dB
- MAXIMUM OUTPUT LEVEL: +22 dB
- FREQUENCY LEVEL: 20 Hz - 20 kHz, 0.3/+0.9 dB
- S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 120 dB
- THD @ 1 KHZ, 0 dB OUTPUT: < 0.02%
- TRANSFORMATOR TYPE: 1+1:1+1
- HOUSING: 1.6 mm / 1.2 mm steel
- FINISH: Scratch-resistant paint
- DIMENSIONS (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.63 kg
FEATURES
- CIRCUIT PRINCIPLE: Passive with transformer-balanced output
- INPUT CONNECTION: 1 TRS mini jack, 2 TRS jack, 2 RCA
- LINK: all inputs in parallel
- INPUT DAMPING: 0 / -20 dB switch
- OUTPUT CONNECTION: 2 XLRm female, balanced, isolation transformer
- INPUT IMPEDANCE: 1 kOhm / 0 dB, -20 dB
- OUTPUT IMPEDANCE: 50 ohms
- OUTPUT GROUNDLIFT: via switch
- MAXIMUM INPUT LEVEL BEFORE CONTROL: +22 dB
- MAXIMUM OUTPUT LEVEL: +22 dB
- FREQUENCY LEVEL: 20 Hz - 20 kHz, 0.3/+0.9 dB
- S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 120 dB
- THD @ 1 KHZ, 0 dB OUTPUT: < 0.02%
- TRANFORMATOR TYPE: 1+1:1+1
- HOUSING: 1.6 mm / 1.2 mm steel
- FINISH: Scratch-resistant paint
- DIMENSIONS (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.63 kg
UNiKA PRO-MMD is equipped with a UNiKA-PRO™ EI30A10E 1+1: 1+1 isolation transformers equipped, which has a special copper foil layer and a dedicated grounding layer, enabling this device to restore high signal-to-noise ratio and dynamic sound and prevent unnecessary losses due to high-frequency interference, grounding interference and potential differences can be avoided.
.
UNIKA
PRO-MMD
PASSIVE STEREO DI BOX
UNIKA
PRO-MMD
PASSIVE STEREO DI BOX
