UNIKA PRO-3SP
UNiKA PRO-3SP is a professional passive splitter that converts a line-level signal into 2 independent transformer-isolated balanced outputs and one parallel local monitor output. In this way, a signal from a mixer, preamp, or other audio source can be sent to a variety of remote and local destinations such as monitor mixers, recording devices, active speakers, and outboard effects.
The input XLR connector connects the output of a mixing console, preamplifier, click tracks or other line level source to the PRO-3SP. UNiKA PRO-3SP is as much at home on stage as it is in the studio with its rugged steel chassis, full-length anti-slip mat and recessed connectors.
FEATURES
- CIRCUIT PRINCIPLE: Passive with transformer-balanced output
- INPUT CONNECTION: 1 XLRf
- LINK/ monitor connector: 1 XLRm monitor connector
- INPUT CONTROL: 0/-20dB push button
- OUTPUT CONNECTION: 2 XLRm female, balanced, isolation transformer
- OUTPUT GROUNDLIFT: via switch
- INPUT IMPEDANCE: 4.7 kOhm
- OUTPUT IMPEDANCE: 50 ohms
- MAXIMUM INPUT LEVEL BEFORE CONTROL: +22dB
- MAXIMUM OUTPUT LEVEL: +22dB
- FREQUENCY GAIN: 20 Hz - 20 kHz, 0.3/+0.1 dB
- S/N RATIO @20 HZ - 20 KHZ, UNAMPLIFIED: > 120dB
- THD @ 1 KHZ, 0 dB OUTPUT: < 0.02%
- TRENNTRAFO TYPE: 1+1:1+1
- HOD: 1.6 mm / 1.2 mm steel
- FINISH: Scratch-resistant paint
- DIMENSION (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.62 kg
UNiKA PRO 3SP features a pair of built-in UNiKA-PRO™ EI30A10E 1+1: 1+1 isolation transformers, which have a special copper foil layer and dedicated grounding layer, enabling this device to restore high signal-to-noise ratio and dynamic sound, and avoid unnecessary leakage caused by high-frequency interference, grounding interference and potential differences. PRO 3SP is particularly suitable for recording studios, live performances and fixed installation projects.
