![UNiKA IS2](http://cdn.musicnetwork.ch/images/2023/05/06/pro_is2.webp)
UNIKA PRO-IS2
PRO IS2 is a passive, isolated signal splitter with one input and three outputs that requires neither batteries nor phantom power. PRO IS2 is equipped with a pair of UNiKA-PRO EI9AE3R3 1.25:1 isolation transformers with a special coating, surrounded by an Oriental silicon steel shield with a special copper foil layer and a proprietary grounding layer. The result is a high signal-to-noise ratio and dynamic sound, while eliminating unnecessary interference from high-frequency noise, ground loops, and potential differences. PRO IS2 is ideal for recording studios, live performance and fixed installations.
The input of the PRO IS2 is equipped with combo jacks for balanced XLR and TRS connectors. The CH-1/CH-2 output channels are each equipped with an independent UNiKAPRO isolation transformer and an independent GND/LIFT switch to prevent interference caused by potential differences and ground loops.
![UNiKA PRO IS2](http://cdn.musicnetwork.ch/images/2023/05/06/pro_is2_back.webp)
FEATURES
- FREQUENCY RATE: 20Hz-20KHz, -0.3/+0.1dB
- S/N RATIO @20HZ~20KHZ UNWEIGHTED: >120dB
- T.H.D.@1KHZ 0DBV OUTPUT: <0.02%
- TRANSMISSION RATIO: 1.25:1
- HUSING: 1.6mm/1.2mm steel case and chassis
- SURFACE FINISH: Durable complex painting
- DIMENSIONS (W X D X H): 78 x 124 x 46 mm
- WEIGHT: 0.62kg
- CIRCUIT PRINCIPLE: Passive with transformer-balanced output
- INPUT: 2 x combo jacks
- INPUT IMPEDANCE: 4.7KΩ balanced/10KΩ unbalanced
- OUTPUT IMPEDANCE:600Ω
- MAX. INPUT LEVEL BEFORE CLIPPING: +22dB
- MAX. OUTPUT LEVEL: +22 dB
- OUTPUT GND/LIFT SWITCH: Independent push button for each channel
![UNiKA PRO IS2](http://cdn.musicnetwork.ch/images/2023/05/06/pro_is2_front.webp)
The CH-2 is equipped with a toggle switch. If the hot pin of the cable is pin 3, this button can be used to switch the hot pin to pin 2. Each output has an independent GND/LIFT switch that can be used to ground or unground pin 1 of the output to avoid noise or loss in case of ground loops or unintended ground loops.
UNIKA
PRO-IS2
PASSIVE ISOLATED SIGNAL SPLITTER
UNIKA
PRO-IS2
PASSIVE ISOLATED SIGNAL SPLITTER